Fanimation 54" 5 Blade Ceiling Fan - Blades, Light Kit, and Remote Control Included

Included Components:

• (5) Reversible Cherry / Walnut Blades
• (1) 6" Downrod
• Light Kit with (3) 40 Watt Candelabra Bulbs and Amber or Opal Glass
• 3-Speed Remote Control (Model TR24)
• Canopy and Mounting Hardware

Special Features:

• Smart, Stylish, Savvy - The Andover is the kind of rare gem that shines in any setting. The bold lines and understated elegance make this versatile fan work in either a contemporary or traditional room.
• Energy Efficient 3-Speed Reversible AC Motor
• UL Listed for Dry Locations Only
• Covered by Fanimation's 1-Year Comprehensive Warranty, plus Limited Lifetime Motor Warranty
• Optional Wall Control Available

Blade Specifications:

• Blade Span: 54"
• Number of Blades: 5
• Blade Pitch: 14°
• Blades Included: Yes

Motor Specifications:

• Motor Type: AC Induction
• Speeds: 3
• Reversible Motor: Yes
• CFM (On High Speed): 5732
• RPM (On High Speed): 164
• Voltage: 120

Have a Sloped Ceiling?

The Andover can be installed on sloped ceilings up to 30° right out of the box. For ceilings up to 52° you'll need to purchase the SCB1-52 sloped ceiling adapter and a minimum 12" downrod, both of which are offered upon adding this fan to your cart.

Have a High or Low Ceiling?

The Andover is designed for installation on standard 8 to 9 foot ceilings. If you ceiling is higher, you'll need to purchase an additional downrod, which will be offered upon adding this fan to your cart. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CCK8002 sloped ceiling kit to reduce the hanging height of your fan.

Suggested Downrod Lengths for Tall Ceilings:

• 9 Foot Ceiling: 6" - 12"
• 10 Foot Ceiling: 12" - 18"
• 11 Foot Ceiling: 18" - 24"
• 12 Foot Ceiling: 24" - 36"
• 13 Foot Ceiling: 36" - 48"
• 14 Foot Ceiling: 48" - 60"
• 15 Foot Ceiling: 60" - 72"
• For ceiling heights greater than 15 feet, you'll need to purchase the DR1-CP downrod coupler to join two downrods together.